Hi,
Looking for the lower half of the throttle linkage that runs up through the steering column for an early… green dash, 1957 820. The part is the same on a 1952 R and given that, I’d expect it would be the same on an 80 as well. I also need the long nut for adjusting the two halves. This piece I’m after is the lower and shorter of the two with the left hand thread. The long nut is threaded right on one end and left hand on the other. Also need the guts for the throttle inside the top of the steering column. Mostly need the small keyed and threaded shaft but would really like all the components up there. Mother Deere still shows the friction washers as a real part number but none of the other components.
Please let me know at your earliest convenience if you have any of these pieces… especially the throttle lower linkage and nut. I borrowed the linkage end and nut from my R and would like to run both of these tractors to our local show on the 20th thru the 22nd.
Thanks,
Bob